AmpOn
Hardware catalog

EV charging hardware, built to run.

Ten charging platforms for residential, commercial and public fast-charging sites, backed by multi-layer protection, open standards and responsive technical support.

3 years
AC charger warranty
2 years
DC charger warranty
Tech support
Deploy + operate

Multi-layer safety protectionOCPP 1.6J + 2.0.1

Commercial AC · Level 2

Pedestal, portal, kiosk and wall-mount units for shared and public parking.

19.2–38.4 kW

Residential AC

Single-port Level 2 for homes, townhomes and assigned condo parking.

9.6–11.5 kW

DC fast charging

Dual-connector DC platforms for corridor, retail, fleet and transit sites.

40–240 kW
Accessories

Pedestal mounting options

Nine steel pedestal kits that turn a single- or dual-plug AmpOn wall charger into a free-standing installation: single, back-to-back, triangular and hexagonal, with or without an integrated cable management system.

Single pedestal for 1 single-plug charger, with 1 cable holster

AMP-P1S1

Single · 1 charger

Size (W×D×H)
27 × 20 × 133 cm
Weight
6 kg net / 16 kg shipping
Material
Steel
Single pedestal for 1 dual-plug charger, with 2 cable holsters

AMP-P1D1

Single · dual plug

Size (W×D×H)
27 × 20 × 133 cm
Weight
7 kg net / 17 kg shipping
Material
Steel
Back-to-back pedestal for 2 single-plug chargers, with 2 cable holsters

AMP-P2S2

Back-to-back · 2 chargers

Size (W×D×H)
27 × 20 × 133 cm
Weight
7 kg net / 17 kg shipping
Material
Steel
Triangular pedestal for 2 single-plug chargers, with 2 cable holsters

AMP-P3S2

Triangular · 2 chargers

Size (W×D×H)
33 × 30 × 133 cm
Weight
12.5 kg net / 22.5 kg shipping
Material
Steel
Single pedestal for 1 single-plug charger, with 1 holster and 1 cable management system

AMP-P1S1CMS1

Single + cable management

CMS
Size (W×D×H)
41 × 30 × 194 cm
Weight
21 kg net / 41 kg shipping
Material
Steel
Back-to-back pedestal for 2 single-plug chargers, with 2 holsters and 2 cable management systems

AMP-P2S2CMS2

Back-to-back + cable management

CMS
Size (W×D×H)
41 × 30 × 194 cm
Weight
21 kg net / 41 kg shipping
Material
Steel
Triangular pedestal for 2 single-plug chargers, with 2 holsters and 2 cable management systems

AMP-P3S2CMS2

Triangular + cable management

CMS
Size (W×D×H)
33 × 30 × 181 cm
Weight
21 kg net / 41 kg shipping
Material
Steel
Triangular pedestal for 1 dual-plug charger, with 2 holsters and 2 cable management systems

AMP-P3D1CMS2

Triangular dual-plug + CMS

CMS
Size (W×D×H)
33 × 30 × 181 cm
Weight
21 kg net / 41 kg shipping
Material
Steel
Hexagonal pedestal for 2 dual-plug chargers, with 4 holsters and 4 cable management systems

AMP-P6D2CMS4

Hexagonal · 4 cable systems

CMS
Size (W×D×H)
45 × 25 × 181 cm
Weight
29 kg net / 49 kg shipping
Material
Steel

Choosing a configuration

Single and back-to-back pedestals suit one or two independent charge points on a shared footing. Triangular pedestals group two chargers at an angle for shared-bay layouts, and the hexagonal pedestal hosts up to four dual-plug chargers on a single base for high-density hubs.

Cable management system (CMS)

CMS-equipped pedestals add a retractable holster per plug that keeps charging cables off the ground between sessions, reducing trip hazards and cable wear. Available on every configuration shown above.

Not sure which unit fits the site?

Dwell time, available electrical capacity and how many bays go in at once usually decide this before the spec sheet does. Tell us about the property and we will work through it with you.

10 platforms · 9 pedestal configurations · OCPP 1.6J and 2.0.1